|
Dynamometer Test
|
| |
|
|
Test Parameters
|
| Location: |
Wegner Motorsports (Markesan, Wisconsin) Major independent test center for car engines (including racing car engine performance). |
| Break-in: |
Approximately 20 minutes using standard mineral base motor oil |
| |
After break-in, the motor oil in engine A was replaced with a motor oil formula which used EnginALL. The motor oil in engine B was replaced with a NASCAR recommended motor oil. |
| |
|
| Session 1: |
Approximately 1 1/2 hours at 80% load with sweeps every 15 minutes. |
| Session 2: |
Approximately 1 1/2 hours at 100% load with sweeps every 15 minutes. |
| |
|
| End: |
Engines were disassemble and components were checked for wear. |
| |
|
|
Engine A
|
| Motor oil: |
Demson's Everoil (EnginAll Performance Additive Technology)
|
| Engine Manufacturer: |
General Motors |
| Cubic inch: |
350 |
| Stated horsepower: |
250 HP |
| Actual horsepower after break-in: |
266 HP |
| Actual horsepower after test: |
287 HP |
|
|
 |
| |
|
|
Engine B
|
| Motor oil: |
NASCAR Recommended Motor Oil |
| Engine Manufacturer: |
General Motors |
| Cubic inch: |
350 |
| Stated horsepower: |
250 HP |
| Actual horsepower after break-in: |
265 HP |
| Actual horsepower after test: |
266 HP |
|
 |
Trucking Industry
